Documentation only. This model is not listed in the online store. Contact FlyingRC for availability.
Overview
A higher-performance fixed-wing flight controller page for users choosing an H7-class board for more processing headroom and richer peripheral integration.
- H743-class fixed-wing autopilot controller
- Supports CAN/GPS/peripheral expansion planning
- Includes dimension and battery wiring references
Hardware revision
Check the sensor markings and component layout on your board against the manual and diagrams below.
Setup notes
- Treat this as a fixed-wing autopilot board: verify power input, GPS/compass, receiver, telemetry, and servo outputs before powering the full airframe.
- Check the dimension and battery wiring images before selecting an enclosure or mounting stack.
- Use the product image and wiring references to plan power and peripheral routing.
- Exact connector pinout should be taken from the layout image/manual before wiring.
Wiring & pinouts
Compare the supplied reference with the markings and revision of your own unit before use.
Board layout & identification
Compare the supplied reference with the markings and revision of your own unit before use.
Dimensions & mounting
Check the published dimensions and connector clearance against your installation.
Original specification reference
View original reference sheets (1)
Original specification sheets are retained as a reference. Use the revision notices on this page when comparing sensor or configuration variants.
