Overview
A compact single-channel AM32 ESC. It drives one brushless motor, making it useful for single-motor fixed-wing aircraft, compact vehicles, or builds where separate ESC placement is preferred.
- AM32 single-channel ESC
- 40 A class for one brushless motor
- 6-30 V / 2-6S LiPo input range
Hardware revision
Check the sensor markings and component layout on your board against the manual and diagrams below.
Setup notes
- Remove propellers before ESC parameter tuning or firmware flashing.
- Power the ESC with a LiPo battery when tuning/flashing, following the ESC manual.
- Use the offline AM32 parameter tuning workflow; the manuals warn against web-based firmware flashing.
- Input: 6-30 V DC / 2-6S LiPo.
- 40 A single ESC class.
- Uses offline AM32 parameter tuning workflow.
- Incorrect firmware flashing can damage the ESC MCU; use the manual workflow.
Wiring & pinouts
Compare the supplied reference with the markings and revision of your own unit before use.
Board layout & identification
These are annotated component drawings, despite their original photo labels. They identify the LDO, MCU and MOSFET locations; they do not replace the pad map.
Dimensions & mounting
Check the published dimensions and connector clearance against your installation.
Original specification reference
View original reference sheets (1)
Original specification sheets are retained as a reference. Use the revision notices on this page when comparing sensor or configuration variants.
