Overview
A two-in-one AM32 ESC that drives two brushless motors from one compact board. It is especially useful for twin-motor fixed-wing aircraft or compact dual-motor builds.
- AM32 two-in-one ESC
- 40 A dual-motor class
- 2-6S LiPo input range
Hardware revision
Check the sensor markings and component layout on your board against the manual and diagrams below.
Setup notes
- Remove propellers before ESC parameter tuning or firmware flashing.
- Power the ESC with a LiPo battery when tuning/flashing, following the ESC manual.
- Use the offline AM32 parameter tuning workflow; the manuals warn against web-based firmware flashing.
- 40 A two-in-one ESC class.
- AM32 firmware version information and update workflow are documented in the manual.
- Incorrect firmware flashing can damage the ESC MCU; use the manual workflow.
Wiring & pinouts
Compare the supplied reference with the markings and revision of your own unit before use.
Dimensions & mounting
Check the published dimensions and connector clearance against your installation.
Assembly reference
The soldered example shows the power leads and two motor-wire groups. Use the labeled diagram to confirm each connection.
Original specification reference
View original reference sheets (1)
Original specification sheets are retained as a reference. Use the revision notices on this page when comparing sensor or configuration variants.
Manuals & references
Product manualOpen / download